Swiusd Helicoil Type Thread Repair Kit 131 Piece, M5 M6 M8 M10 M12 Thread Repair Kit, Helical Threaded Kit, Insert Installations Wire Thread Inserts Twist Drill Bits Thread Taps Lug Breaking (Red) 131 Piece Helicoil Type Thread Repair Kit
product description:
Damaged thread M5 M6 M8 M10 M12 repair kit
Made of chrome vanadium steel for strength and durability.
Suitable for repairing damaged wires in steel, cast iron, iron and aluminum.
Suitable for maintenance of engines and other automotive applications.
Perforation: Use a standard drill to clean damaged threads. (To repair the spark plug threads, if a special spark plug is used, no pre-drilling is required.) Please note that the non-flow faucet requires a larger hole.
Check that the threads and the channels of the faucets and bolts match.
Threading: Use special thread to cut the clamping threads in the hole (recommended for proper oil cutting)
Install the insert in the installation tool and place the adjustable ring so that the latch is in the center of the shank. Roll the blade to a half turn below the surface with a slight downward pressure.
It does not work in the direction of the line because the handle may break.
Don Removal - When finished, lift the installation tool and use the Down's Fracture Tool to remove the spikes. For larger sizes and spark plug faucets, use long nose pliers to remove the spikes. New threads are usually stronger than the original thread due to narrow and precise tolerances.
110 pieces of steel thread inserts
M5 x 0.8 x 6.7mm
M6 x 1.0x8.0mm
M8 x 1.25x10.8mm
M10 x 1.5x13.5mm
M12 x 1.75x16.3mm
Products include:
5 installation tools
5 broken needle tools
5 drill bits
1 x hex wrench
5 taps
